AP6511 Single Radio Access Point
AP6511 Single Radio Access Point
Price: Request Quote
Type: Wireless LAN
Brand: Zebra Technologies
Model: AP6511
The AP 6511 is expressly designed for one of the most challenging wireless LAN environments – dormitory and hotel guest rooms. Standard service personnel can install the AP 6511 in minutes using existing category 5 or 6 cabling already in the walls. The installation is predictable and repeatable – two key reasons why the AP 6511 will dramatically lower the installation time and cost of a room’s wireless LAN. The AP's sleek "hide in sight" design and minute size match the decor of any room.
The AP 6511 includes intelligent self-optimizing controller AP code – enabling a small property to gain the benefits of a central controller – automatic adoption, central configuration and status, as well as automatic RF management, without the cost of a dedicated RF switch. For larger properties and facilities, Zebra’s WiNG-based RF switches can manage the AP 6511 , for very high scalability and seamless integration with other indoor and outdoor 802.11n access points.
Simplify and reduce the total cost of installation using standard Power-over-Ethernet (PoE). Operate in either 2.4Ghz or 5.0Ghz frequency bands to support 802.11b/g/n or 802.11a/n wireless LANs.
Support fast, secure roaming and rate scaling. Pre-emptive roaming and load balancing are supported when connected to an RF Switch to increase reliability and network resilience. This unique multi-purpose device can execute and enforce the IDS/IPS security policies configured in the wireless switch, and can also be utilized as a 24x7 dedicated sensor with wireless IPS from AirDefense solutions.
The mounting bracket features six unique hole patterns to match most telecom plates worldwide. A keystone, snap-in port provides a fast method to connect any secondary cabling behind the wall to the AP. If the snap-in port is not used for a secondary cable, it can be dedicated as a switched Fast Ethernet port. To further add modularity and flexibility in network design, a three-port Fast Ethernet Module can be field installed via a snap-in access port.


Available Mount Configurations: Mount over any structured wiring telecom box, or on a flat surface.

LEDs: Two single color status LEDs; power, error, packets, operating frequency
Weight: 1 lbs / 0.5 kg
Dimensions (HxWxD): 5" x 2.95” x 1” (12.8cm x 7.5cm x 2.54cm). 12oz (0.34Kg)
Physical interfaces: 10/100Mb auto-sensing via 8-pin header 10/100Mb auto-sensing
Integrated Power Over Ethernet Support: Standards-based IEEE 802.3af
Operating Voltage: 802.3af supply: 48 VDC @ 12.95W (typical), 36 VDC to 57 VDC (range)
Operating Current: 0.170w (typical)
Maximum Transmit Power Settings: 20dBm
Network Standards: 802.11a, 802.11b, 802.11g, 802.11n
Operating Channels: 5GHz: All channels from 4920 MHz to 5825 MHz 2.4GHz: Chan 1-13 (2412-2472 MHz), Actual operating frequencies depend on national regulatory limits
Layer 2 and Layer 3: 802.11-802.3 bridging, 802.1q VLAN tagging and trunking, Dyn DNS, DHCP server/client
Management: Independent management via SSH, Telnet. Adopted management by Controller AP available at first release. Adoption by RF switch available in future software release.
Data Rates Supported: 802.11b/g: 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, and 54Mbps 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54Mbps 802.11n: MCS 0-15 up to 300Mbps
Operating Bands - EU: 
FCC EU 2.412 to 2.462 GHz 2.412 to 2.472 GHz 5.150 to 5.250 (UNII -1) 5.150 to 5.250 GHz 5.725 to 5.825 (UNII -3) 5.150 to 5.350 GHz 5.725 to 5.850 (ISM) 5.470 to 5.725 GHz (Country Specific) Japan 2.412 to 2.484GHz 4.900 to 5.000 GHz 5.150 to 5.250 GHz
Wireless Medium: Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM), and Spatial Multiplexing (MIMO)
Security: Stateful Firewall, NAT, 802.1x, 802.11i, WPA2-CCMP (AES), WPA2-TKIP, WPA-TKIP, Rogue Detection, Secure guest access (HotSpot)
QoS: 802.11e, 802.1p, DiffServ, TOS
EMC: FCC Part 15 Class B
Environmental: EU RoHS Directive 2002/95/EEC
Electrical Safety: EN 60950-1
Human Exposure EMF: EN 50385, FCC Part 2, OET Bulletin 65, RSS-102 Issue 2
Electrostatic Discharge: +/- 15 kV (Air), +/- 8 kV (contact)
Operating Humidity: 5 to 95% RH (non condensing)
Storage Altitude: 15, 000 ft./4572 m
Operating Altitude: 8, 000 ft./2438 m
Operating Temperature: -4F to 122F / 0C to 50C
Storage Temperature: -40F to 158F / -40C to 70C
Request a Quote
Request a Quote
View Our Current Promos